Plan your mission and monitor it live.
Easily create waypoints and link them together.
The multibeam sonar provides high-resolution imagery for near field target identification in low visibilitty conditions.
Load your ship’s general arrangement diagram, scale your vessel and calibrate the position of the vehicle, and you are ready to get inspecting.
Stream live video from your underwater vehicle to your remote coordinators and extend the reach of classification bodies in remote locations. No travel time, travel costs, or waiting time.
Generate and Share encrypted PDF reports in minutes. Every image included in your reports is indexed with metadata, like the image's GPS coordinates.
Collect UT and CP measurements and scaled photos. Data collected is automatically organized in your reports.
Avoid inconvenient rework by reviewing your data while still onsite. Check your images and video directly in the SeaDrone App. Annotate recorded data in real-time.
A custom algorithm automatically adjusts the color, contrast, sharpness, and brightness of your underwater photos.
SeaDrone’s sensor fusion algorithm ensures that the vehicle’s position will be accurate over time.
Autopilot control commands are designed to assist you with the most burdensome parts of driving. (DVL and the SeaDrone Sphere Locator are required to access all Autopilot control functions.)
Create and automatically navigate custom waypoint missions.
Navigate to waypoints without requiring DVL bottom-lock.
Click on the map and have the vehicle automatically plan an efficient trajectory to the destination.
Flag points of interest and navigate back to them with the touch of a button.
Pilot with less fatigue and free your hands.
Control the vehicle relative to a target on the multi-beam.
O-rings included
O-rings included
Full tether repair kit. Replace the strain relief on your tether and also replace the connectors on your tether and vehicle. Replacing this connector requires support from SeaDrone's customer service team.
Specification Table
| Length | 17.6 mm |
|---|---|
| Center Pin Ø | 2.5 mm |
| Outer Ø | 5.5 mm |
| Voltage Rating | 48 v |
| Current Rating | 6.0 A |
| Operating Temperature | 105 °C |
