PRO Spare Thruster
PRO Spare Thruster
$189.00
Propeller:
Quantity:
Add To Cart
Product Description
New thruster designed for the SeaDrone PRO vehicles have been designed to be replaced in minutes without opening the main waterproof housing. Thruster has been designed to provide unmatched control, thrust performance, and ease-of-use. Thruster generates over 2.5 kg of force.
Features
- The bearings and anti-vibration mechanism are designed for underwater use. The life cycle of the thruster will be significantly decreased if operating the thruster out of water.
- High power motors can be dangerous. The propellers can act as sharp blades at high speeds. Make sure to firmly clamp down the thrusters and wear safety equipment (goggles, gloves, etc), specially during initial tests.
- Always disconnect all power sources before rewiring a circuit. Otherwise the electronics could be damaged. For example, if you need to swap a motor or a driver, make sure to unpower everything first.
- SeaDrone is not liable for any damage derived from the misuse of the SeaDrone Smart Thrusters electronics, hardware and/or software.
Specification Table
Max Forward-Thrust | 2.5 kgf |
Max Reverse-Thrust | 2.3 kgf |
Min Thrust Force | 0.005 kgf |
RPM Range | 300-5000 rev/min |
Operating Voltage | 18-36 V |
Max Current | 7 A |
Max Power | 175 W |
Weight in Air | 250 g |
Weight in Water | 125 g |
Contents Included
- Thruster
- Required O-rings