I3 Thruster

CSP_1947.jpg
CSP_1947.jpg

I3 Thruster

190.00
Thruster Mount:
Quantity:
Add To Cart

SeaDrone's I3 Thruster has been designed to provide unmatched control, thrust performance, and ease-of-use. Generating over 2.5kg of force (5.5 lbs) and measuring under 60mm x 96mm, makes SeaDrone’s I3 Thrusters can be replaced in minutes.


Power vs Propeller RPM

Thruster vs Propeller RPM

IMPORANT NOTES:

  • The bearings and anti-vibration mechanism are designed for underwater use. The life cycle of the thruster will be significantly decreased if operating the thruster out of water.
  • High power motors can be dangerous. The propellers can act as sharp blades at high speeds. Make sure to firmly clamp down the thrusters and wear safety equipment (goggles, gloves, etc), specially during initial tests.
  • Always disconnect all power sources before rewiring a circuit. Otherwise the electronics could be damaged.
  • For example, if you need to swap a motor or a driver, make sure to unpower everything first.
  • SeaDrone is not liable for any damage derived from the misuse of the SeaDrone Smart Thrusters electronics, hardware and/or software.